 | Tel. no. +44 1252 510550 - Fax. no. +44 1252 373596 |
Online Catalogue : Heating Cable Connectors & Controllers
| | | JBS-100-E Single Entry Power Junction Box. Cat. no. HC-101
The JBS-100 kit is designed to connect power to one BTV, QTVR, XTV, KTV or VPL parallel heating cable and is approved for use in hazardous areas. The JBS-100 kit is both a connection and insulation entry kit combined. The stand protects the heating cable and allows for upto 100mm (4") of thermal insulation, while the sealing boot allows for non hot work permit connection and ease of maintenance. The kit is certified II 2 G EEx e II and consists of:1 x junction box, 1 x stand, 1 x core sealer, 1 x green/yellow earthing sleeve, 1 M25 gland (power cable 8-17mm dia), 1 x M25 stopping plug & 1 x adapter for small pipes
|  | |
|  | JMB-100 Multiply Entry Power/Tee Junction Box. Cat. no. HC102
The JBM-100 kit is designed to connect power to upto three BTV, QTVR, XTV, KTV or VPL parallel heating cables and is approved for use in hazardous areas. The JBM-100 kit is both a connection and insulation entry kit combined. The stand protects the heating cable and allows for upto 100mm (4") of thermal insulation, while the sealing boot allows for non hot work permit connection and ease of maintenance. The kit is certified II 2 G EEx e II and consists of:1 x junction box, 1 x stand, 3 x core sealers, 3 x green/yellow earthing sleeve, 1 M25 gland (power cable 8-17mm dia), 2 x M25 stopping plugs & 1 x adapter for small pipes
| |
| JBU-100 Junction Box. Cat. no. HC-103
The JBU-100 kit is designed to connect power to one BTV, QTVR, XTV, KTV or VPL parallel heating cable and is approved for use in hazardous areas. The JBU-100 kit is part of the modular component system and can be either wall or pipe mounted. The kit is certified II 2 G EEx e II and consists of:1 x junction box with terminals, 1 x M25 gland (power cable 8-17mm dia), 2 x M25 stopping plugs
|  | |
|  | C-150-E Low Profile Power Connection. Cat. no. HC-104
Cold applied low profile connector for connection of one BTV, QTVR, XTV or KTV heating cable to a power cable 3 x 1.5mm2 or 3 x 2.5mm2. It can be used in temperature ranges -50 deg C to +215 deg C and is approved for use in hazardous areas certified II 2 G EEx e II
| |
| T-100 Tee or Splice Connector. Cat. no. HC-105
The T-100 kit is an above insulation tee or splice connection kit designed to connect upto three BTV, QTVR, XTV. KTV or VPL parallel heating cablesand is approved for use in hazardous areas. The stand protects the heating cable and allows for upto 100mm (4") of thermal insulation, while the sealing boot allows for non hot work permit connection and ease of maintenance. The kit is certified II 2 G EEx e II and consists of:1 x tee/splice enclosure and lid, 1 x stand, 3 x core sealers, 3 x green/yellow earthing sleeves, 3 x compression crimps, 3 x crimping insulating tubes & 1 x adapter for small pipes
|  | |
|  | E-100-E End Seal Cat. no. HC-106
The E-100-E is an accessible, re-entrable end seal for use on BTV, QTVR, XTV, KTV & VPL parallel heating cables and is certified for use in hazardous areas EEx e II. The heating cable is held in place by the integral strain relief, and a double seal.
| |
| E-150 Low Profile End Seal. Cat. no. HC-107
The E-150 is a cold applied low profile end seal for use with one BTV, QTVR, XTV or KTV parallel heating cable. It can be used in temperature ranges -50 deg C to +215 deg C and is approved for use in hazardous areas certified II 2 G EEx e II.
|  | |
|  | S-150 Low Profile Splice. Cat. no. HC-108
The S-150 is a cold applied low profile splice for in-line connection of two BTV, QTVR, XTV or KTV parallel heating cables. It can be used in temperature ranges -50 deg C to +215 deg C and is approved for use in hazardous areas certified II 2 G EEx e II
| |
| E-06 Heat Shrink End Seal. Cat. no. HC-109
The E-06 end seal kit is for use with BTV & QTVR parallel circuit heating cables. The end seal employs easy to use heat-shrinkable tubing with an adhesive, that when heated forms a semi-flexible moisture proof encapsulation. Approved for use in hazardous areas and certified EEx e II
|  | |
| | | E-19 Heat Shrink End Seal. Cat. no. HC-110
The E-19 end seal kit is for use with XTV & KTV parallel circuit heating cables. The end seal employs easy to use heat-shrinkable tubing with an adhesive, that when heated forms a semi-flexible moisture proof encapsulation. Approved for use in hazardous areas and certified EEx e II
| |
| EX-02 Mechanical Thermostat. Cat. no. HC-201
The EX-02 is an approved surface sensing thermostat providing temperature control for BTV, QTVR, KTV, and XTV heating cable. Switching temperature range is -4 deg C to +163 deg C, adjustable externally. Switching current capacity is 22A, but the thermostat has a continous current limit of 32A. It has a single pole change-over switch with volt free contacts. 1 x 3/4" Npt cable entry. 3m long stainless steel fluid filled bulb and capillary. Cast aluminium housing with stainless steel fittings. Approved for use in zone 1 hazardous areas certified EEx d IIC T6, Ingress protection to IP65, Ambient temperature range -20 deg C to +40 deg C
|  | |
|  | EX-03 Electronic Thermostat. Cat. no. HC-202
The EX-03 electronic surface sensing thermostat provides accurate control for BTV< QTVR, KTV, XTV & VPL parallel heating cables. This thermostat can be supplied as either 110V 50/60 Hz or 230V 50/60 Hz nominal voltage and has a double pole 16A switch which can be arranged to be volt free. The temperature range is 0 to +499 deg C and is set via a digital thumb wheel within the enclosure. Supplied with a PT100 sensor and 2 m long stainless steel sheathed cable. 2 x M20 and 1 x M25 entry. Approved for use in zone 1 hazardous areas EEx e m ia IIC. Ingress protection to IP66. Ambient temperature range -50 deg C to +40 deg C
| |
| EX-04 Electronic Thermostat. Cat. no. HC-203
The EX-04 electronic ambient sensing thermostat provides accurate control for BTV, QTVR, KTV, XTV & VPL parallel heating cables. This thermostat can be supplied as either 110V 50/60 Hz or 230V 50/60 Hz nominal voltage and has a double pole 16A switch which can be arranged to be volt free. The temperature range is 0 to +499 deg C and is set via a digital thumb wheel within the enclosure. Supplied with a PT100 sensor and wind shield. 2 x M20 and 1 x M25 entry. Approved for use in zone 1 hazardous areas EEx e m ia IIC. Ingress protection to IP66. Ambient temperature range -50 deg C to +40 deg C
|  | |
|  | TM-20 Surface Sensing Thermostat with Limiter. Cat. no. HC-204
The TM-20 surface sensing thermostat provide temperature control and temperature limit within hazardous areas. The high limit cut out prevents the heating system exceeding a preset maximum temperature should the control function fail to operate or an unsafe process temperature occurs. For use with BTV, QTVR, KTV, XTV & VPL parallel heating cables. Maximum rate voltage is 400VAC. 16A Single pole 16A switch which can be arranged to be volt free. The temperature range is +5 to +215 deg C for the Controller, +40 to +300 deg C for the Limiter. Supplied with a PT100 sensor and 2 m long stainless steel sheathed cable. 2 x M25, 1 x M25 with M25/M20 reducer, 2 x M20 plug and 2 x M20 capillary sensors entries. Approved for use in zone 1 hazardous areas EEx e d IIC T6. Ingress protection to IP65. Ambient temperature range -20 deg C to +40 deg C
| |
Online Catalogue : Heating Cable Connectors & Controllers
| Atex Equipment - heat tracing and hazardous area specialists |
|